Beaded Flip Flops DIY Tutorial
The lazy days of Summer are almost here. Whether you want to admit it or not you probably have at least one pair of flip-flops in your closet.


  1. 1 Pair of flip-flops
  2. 1 Spool ½ inch ribbon
  3. Lots of beads in assorted sizes
  4. Tiny seashells
  5. Hot glue gun
  6. Needle and thread

Step 1
Place a small amount of hot glue on the outside of the flip flop strap at the base and attach the end of your ribbon.

Step 2
Continue wrapping your ribbon around the straps on your flip-flops until they are completely covered. Add small amounts of hot glue to hold your ribbon as you go and secure the end when you are finished with hot glue as well.

Step 3
Take your ribbon again and wrap it around and back and forth across the center “V” of your flip-flops to fill in.

Be careful not to make your “V” to high or if you really do want it to go higher, make sure you wrap it loosely otherwise it will be difficult to get your foot into.

Step 4
You’re ready to start adding your beads.
Add your beads one at a time sewing them on, (I put a small drop of hot glue under all of the large and medium sized beads as well as the seashells before sewing them). I stitched through each bead 2 times before going on to the next bead.